Print Backlog
What still has to go on the plate, and why.
13to reprint
1never printed
5225mm bases
650mm bases
675mm bases
Needs reprinting
202609 September Release
reprintGutaki Tentacles L
failed to adhere to the build plate at 3.0s; to be manually supported
202608 August extras sale
reprintAugustana Irregulars A
reprintAugustana Irregulars B
reprintAugustana Irregulars C
reprintHellknight Bastions A supp
reprintHellknight Bastions B
reprintHellknight Bastions C
202607 July release
reprintHorned Dragon Body
reprinted 2026-09-01 at 1.5s from the 32mm heroic mesh; Brian reports the rocks and wings do not fit it. Whole set being reprinted with manual supports
reprintHorned Dragon Rocks
does not fit the reprinted 32mm heroic body - the 32mm meshes are 1.14x the full-size ones, so this was likely printed full size. Reprint from the 32mm mesh
reprintHorned Dragon WingL
does not fit the reprinted 32mm heroic body; likely printed full size (1.14x mismatch). Reprint from the 32mm mesh
reprintHorned Dragon WingR
does not fit the reprinted 32mm heroic body; likely printed full size (1.14x mismatch). Reprint from the 32mm mesh
202606 June Release
reprintBrastlewark Snarecrafter
printed too small: sliced from the full-size (true scale) mesh instead of the 32mm heroic one. Reprint from 32mm_P0043_Brastlewark_Snarecrafter_S1P3_SUP.stl
202605 May Release
reprintSarglagon (Drowning Devil) Arm R
flat spot on one tentacle
Never printed
202609 September Release
slicedScylla Full
Additional prints
202608 August Release
todo@50mmLiving Waterfall
scaled up in Chitubox for use as a monster; kept alongside the 32mm print
202605 May Release
todo@50mmTalmandor Wing
scaled up in Chitubox for use as a monster; kept alongside the 32mm print
todo@50mmTalmandor body
scaled up in Chitubox for use as a monster; kept alongside the 32mm print
Bases to print
| Size | Remaining minis | Backlog | On hand | To print |
|---|---|---|---|---|
| 25mm | 7 | 52 | 7 | 52 |
| 50mm | 5 | 1 | 0 | 6 |
| 75mm | 1 | 5 | 0 | 6 |